Toroid Coil
As you read through the HydroStar Manual,
you will find that the HydroStar Generator
requires you to build a toroid coil that is
placed above the electrodes. This coil
requires you to wind a 23 gauged Teflon
coated copper wire 2000 times through a
donut toroid coil with an inside diameter
hole of 2 inches. Think about it, that’s allot
of winding! So, we now have a company
that does this for us. If you were to order
the parts to do this, the price would be
about $230 to $250. Then you would have
to wind it your self, which is very labor
intensive. You can now purchase the coil for
$175 plus shipping and handling.
If you would like to order the toroid coil
already made for you, then click on the
following link to order: http://www.wam-a-
bam.com/Toroid_Coil_Purchase.