WAM - A - BAM .COM
Dry Cell HHO
Hydrogen Generator
Kits & Prices
Here is everything you need to turn your
water for gas in a fuel cell. The only dry cell
HHO generator kits that you will ever need!
Built for 4,6,and 8 cylinder gas or diesel
engines. Click to the left for warranty
information. We put this kit together
because so many people were requesting a
complete kit that was easy to install. Well,
here it is. Increase miles per gallon by 35%
and higher. Increase power as well. Most
engines get a 40% increase in MPG. You
really save gas at these prices today. This is
for gasoline or diesel engines. The amount
of increase in miles per gallon is hard to
predict but you will save gas!! The variables
are the size of the engine you are installing it
on, what type of engine (gasoline or diesel),
installation of the electronic fuel injection
enhancer if needed, and your driving habits.
You do have a 60 (sixty) day warranty.
This is Wamabam's Basic Installation Kits. It
has everything you need for an easy
installation and start saving on mileage. You
choose from 7 to 34 plate dry cell HHO
generators with or without installation kit.
The more plates you have in your hydrogen
generator, the more HHO gas the generator
will produce in liters per minute.

your engine, will not only increase miles per
gallon but will also increase power, clean
your engine while running, and clean the air
around you with water as part of the
exhaust.  
Hydro-Dry Cell Technology
By  Wamabam.com
The Installation Kits Includes
1 - SUPER HYDRO DRY CELL. You choose
from 7 to 34 plate HHO GENERATOR.

1 - 3 Quart Bubbler/Reservoir

10' Red High Temperature Hose

1 - flashback Arrestor - A note on this: This
is the real thing, not a check valve being
passed off as a flashback arrestor. Be
aware, there are some sellers selling check
valves and calling them flashback arrestors.

1 - 60 amp Amp Meter

1 - 30/40 amp Relay with wiring harness

1 - 30 amp Online Fuse W/fuse

10' Red 10AWG wire

5' Black 10AWG Wire

10' 14AWG Wire for relay switch

1' Shrink wrap for wiring end

All needed wiring ends

Wire ties for wires and hose clamping

Graphical Instructions

Full customer support
INTRODUCING THE
SUPER DRY CELL
No Wires or Flimsy Spade Connectors
Solid Post External Power Connectors
Flow through Design For Cooler Running
High Output (Read Below)
Choose from 7 to 34 plates
High Quality Construction
Fast Shipping
HHO Generators Comes in 7 ,9,11,12,16,and 21,
plates  designs. Also, for big engines, we have the 22
& 34
Double Whoppers.

See
Below
Designed and constructed from only the finest
materials available, our new SUPER DRY CELL
is the next generation in Hydrogen Generators.
It contains plates that are Precision cut 3" X 7"
Corrosion Resistant High Moly Stainless Steel.
The plates are cross hatch sanded to promote
bubble release and then cleansed in an
Ultrasonic cleaner at 40,000 Hz leaving them
microscopically clean. The plates are sealed
between high temperature 1/16" thick EPDM
gaskets. No inferior automotive grade gaskets
used. The end plates are manufactured from
1/2" high grade, high temperature Cast Acrylic.
No Extruded Acrylic used. The end plates
measure only 4-3/16" X 7-3/4" so the unit will fit
were others won't.
You can get the HHO Generators
with or with out the kits.

See
Below
FREE SHIPPING ANYWHERE IN
THE US!
Here is what you won't find in our kit.

You won't find a tiny little 4" X 4" cell with 3" X 3"
plates and cheap o-rings for gaskets. You won't find
a check valve being passed off as a flashback
arrestor. You won't find a little 1 or 1-1/2 quart
bubbler/reservoir. You won't find any Hype or false
promises and that's a guarantee. Oh, one other
thing... You won't have to join any cults, clubs or
mailing lists that keep sending you junk.






















Our new Dry Cell is the result of hundreds of hours of
testing and incorporates revolutionary design
technology.  It features 316L stainless steel 18 gauge
Electrode plates. The cell measures 7-3/4" tall X
4-1/4" wide and is only 4" deep so it will fit in tight
places. This cell will easily produce enough HHO for
engines up to 5.7 liters. See below about liters per
minute production.
About LPM production
As we look around different web sites and on ebay for
HHO generators, we see a lot of claims. It seems that big
LPM (liters per minute) numbers are the in thing to get
sales. While we do believe LPM has a part to play in
getting great gas mileage, we don't believe it is the only
element. We also don't believe people should be misled.
You will see claims of 5 LPM and even 10 LPM in some
cases. The fact is... Those numbers were accomplished
at very High Amperage. 50 to 70 Amp's is not living in the
real world. Any Cell that runs at Amperage that high will
very quickly overheat. Besides that, the load put on the
alternator and therefore the engine would very quickly
erase any gain in mileage.

In the past we have been guilty of some of the same
sales tactics. We showed people LPM ratings that were
taken at high amperage. We felt it necessary in order to
stay competitive. We apologize for that.

We have decided to rate our Cells at a conservative 15 to
30 Amp's. At those amperages you can expect a Cell that
will run without overheating. It won't melt wires or boil the
Electrolyte Solution. It won't overload your alternator. It
will produce all the HHO your engine requires to attain a
great improvement in mileage.

We are going against the grain here in hope that you will
appreciate our honesty.

When choosing a Cell we believe it is wise to purchase a
Cell that will outperform your engines needs. By doing  so
you are assured the Cell will deliver the needed HHO
under all conditions.

The 21 Plate Cell we offer here is perfect for engines 2 to
6 Liters. Yes, it will deliver enough HHO for larger
engines. But, it will only do so at high amperage and we
don't recommend it. Again, just being honest. For engines
larger than 6 Liters we suggest running 2 of these cells
together.

This Cell is probably a little overkill for a 2 to 5 liter engine
but overkill is a good thing. I recommend the 9 plate cell
for engines 3 liters or under. So use your own judgment
when choosing a cell .

Here is a simple rule of thumb to help you choose the
right cell for your particular engine. Figure 1 LPM (liter
per minute) HHO gas for every 1 Liters of engine size.
This will give you the minimum LPM the cell should
produce at low amperage.
So, you choose. You can order only the HHO
Generator by it's self or you can order the HHO
Generator with the kit for quick installation.
You can order the 7 to the 34 plates HHO
generators with or with out the installation kits.
Think of the money you are going to save in
gasoline/diesel!

All our Cells are run for 5 hours to insure there
are no leaks and to pre-condition the plates.
Your investment into the HHO System that you
choose will be processed through PayPal.com.
Paypal.com will take electronic checks or will
process your credit card. You do NOT have to
have an account with Paypal.com to purchase.

For those of you that would rather send me a
money order, wire money through Western
Union, or a personal check, please send to:
Donald Harper (Not wamabam.com), 922
Redway, Houston, Texas 77062. If you need to
call me, my phone number is: 281-488-3955 in
The United States.              

FREE SHIPPING IN THE UNITED STATES
Price                                    Price              
with out Kit                     with installation kit.


7 plates  $250.00                    $329.95

9 plates  $260.00                    $339.95  

11  plates $265.00                    $349.95

13 plates $270.00                     $359.95

16 plate  $280.00                     $374.95   

21 plates $300.00                     $399.95

22 plate (Double Whopper Cell)                    
$380.00                                $459.95

34 plate (Double Whopper Cell)                    
$450.00                                $529.95
$129.95 +S&H (There is shipping
charges for this product)
(Regularly $149.95)

FS2 Volo HHO Chip
Programmed For Your Vehicle

We will need make, model, year
and engine size for programming.
Please e-mail this information to:
admin@wam-a-bam.com or call
order in at: 281-488-3955
Dynamic -Soft Flashing
This circuit works by an exclusive process of
"Dynamic Soft-Flashing" the ECU.

It has been specifically tuned for the needs of vehicles with a
hydrogen generator system installed. The FS2 is dynamic - which
means the FS2 will consider oxygen levels in the exhaust, along
with engine speed and load, intake air temperature and volume,
and many other variables to establish the most efficient fuel
delivery rate and timing at up to 256 separate load points.

When using hydrogen gas as a fuel supplement, the FS2 will
adjust fuel delivery and timing to optimize efficiency.

When HHO gas is disabled, the FS2 will automatically re-adjust
and switch to highly efficient, non-HHO enhanced maps.

The FS2 is a vehicle specific, custom programmed 20MHz
Microcontroller. It utilizes its high speed serial input/output to
communicate directly with the ECU through the OBD-II port.

The FS2 is compatible with factory equipped
Turbo/Superchargers, diesel engines, Flex-Fuel, and HHO
supplement systems. It is NOT compatible with hybrid engine
options, propane, or natural-gas.

The FS2 HHO Chip is legal and not an illegal product. It is not
flashing your ECM's rom memory. It takes data from your
ECM's ram memory.

Easy Installation, only 4 wires! Locate the OBD-II port, use the
included connectors, or solder and you're done. Connects behind
your OBD II connector's wires. You can still use the OBD II
plug for any accessory.

We see about an 80% success rate with the FS2 Hydrogen Chip.  

INTERNATIONAL CUSTOMERS : Please make
sure your vehicle is OBD-II compliant before making a
purchase. 1996-2011 Cars and trucks are OBD II. Will
not work with OBD I ( 1987-95) cars.

Please make sure you give us the year, make and model
and engine size by e-mailing me this information at:
admin@wam-a-bam.com or feel free to phone your order
in at: 281-488-3955
The 34 plate Double Whopper
Cell
Available in 22 plate.
34 Plate "Double Whopper"
Dry Cell
Here’s your chance to own the finest Hydrogen
generator produced. Finally say      goodbye to
overheating and poor production. Comes in 22 plate
as well.

This new Dry Cell is the result of hundreds of
technology. There is no other like it. It features 34
plates in a double cell with over 1070 sq. inches of
actual “active” surface area. That’s almost 7-1/2
square feet of active HHO producing surface area.
This cell will easily produce enough HHO for a 10
Liter Engine.

DON'T BE FOOLED BY COPY CATS!

They can copy the outside appearance of our center
"Anti-Reversion Plate" but not it's functionality.

Our Center "Anti-Reversion Plate" is not just a
dummy plate between cells. It features dual
chambers that effectively separate the intake and
output from each cell. This allows the electrolyte
solution to freely flow without the aid of a pump.
The result is a cooler running cell that produces
more HHO due to it's better flowing characteristics.
The design is so effective that we have applied for a
US Patent. While we have no intention of hindering
the open and free development and research of the
technology in general... This is our Business and we
must protect it. If you would like to build your own
cell utilizing our design "For Personal Use Only"
please feel free to do so.

Designed and constructed from only the finest
materials available, our new SUPER DRY CELL is
the next generation in Hydrogen Generators. It
utilizes electrode plates that are precision cut 3" X
7" 316L 18 Gauge Stainless Steel. All plates are
cross hatch sanded to promote bubble release and
then cleansed in an Ultrasonic cleaner at 40,000 Hz
leaving them microscopically clean. The plates are
sealed between high temperature 1/16" thick high
temperature and chemically resistant gaskets. No
inferior automotive grade gaskets used. The end
plates are 1/2" thick and the center "Anti-Reversion"
plate is 1" thick. No Extruded Acrylic used.


Be Advised.

If you intend to put any kind of hydrogen generator on a
car or truck's engine that is fuel injected, and most are,
you will need a electronic fuel injection enhancer (EFIE)
for all of your O2 sensors or the FS 2 hho chip. The
system will not work with out an EFIE or FS 2 chip. Thats
the bottom line.

To get all the information about EFIEs and which one is
best for your truck or car's engine:

CLICK HERE
The EFIE (Electronic Fuel
Injection Enhancer)
Hydrogen hho installation kits
by Wam-A-Bam.com
EFIE's (electronic fuel injection enhancer)        
$129.95
((For engines 1995 or older.))
If you have a car/truck that is 1995 or older you can
not use the FS 2 hho chip. You will need an  EFIE
(electronic fuel injection enhancer). You will need to
e-mail me your year, make, model, and size of engine
at: admin@wam-a-bam.com. Please indicate that you
are ordering a EFIE and not the FS 2 hho chip.
Order here or above.   


For your engine to run right with a hydrogen
generator you must have an electronic device that will
let the computer on your car except the hydrogen
generator. Other wise, your computer will read the
exhaust gases as too lean of a burn in your engine and
will want to inject more fuel into you engine. This will
go against what we are trying to do. We want less fuel,
not more. So, hence, the EFIE (electronic fuel
injection enhancer) was created. You do not need this
on diesel engines. You do not need it on cars that do
not have a computer on board like carburetors. But
odds are, you have fuel injection on your gasoline car
and you will need an EFIE to make your hydrogen
generator work.

But there is a better electronic device that does it all
and it plugs right into the computer of your car at the
OBD-II port.
Home
Free Web Counters
Instant Cash Advance Austin